How To Setup Zmodo Camera To Wifi

zmodo HD WIFi Indoor/ Outdoor Photographic camera Kit User Guide

Mobile Setup

This quick commencement guide will help you lot configure your WiFi photographic camera kit for initial use. Before performing any permanent installation, we recommend that you complete the mobile setup in Department 1 to connect your cameras and make sure that zero was damaged during shipping.

Before you begin:

• Plug in and ability on all cameras near your router for initial setup. Fasten the antennas (if applicable) onto the cameras.
• Make sure that you have a strong WiFi connection at the location of your cameras.
• Make sure you lot know the SSID (WiFi network name) and password of the ii.4GHz WPA-PSK/WPA2-PSK WiFi network that you lot want your cameras to connect to. Your
  network cannot exist hidden.
• Make sure your network has at least 1Mbps upload speed for each camera when alive viewing or 2Mbps upload speed for each camera when using the cloud service.
• Download and install the "Zmodo" app from Google Play or the App StoreTM (compatibility: iOS nine.0+ or Android TM 4.0+). Launch the app and sign upward for a gratis Zmodo
  account. All of your devices will be bound to this account.
  

We are constantly working to improve our product and app. Please visit
www.zmodo.com/back up for updated instructions, manuals, and more.

1. Log in and press the Add Device option in the upper right corner of the Dwelling house Folio.
   
2. Select the "QR Code" connection method to connect your device(s). Your device(south) will be added to your Zmodo account.
   You can follow the in-app instructions or refer to steps iii-9 to consummate setup.
   
3. Power on your device(s). The status calorie-free will blink green when the device has powered on. Tap "Next" to continue.
   
4. Plow upward the volume on your telephone for voice prompts during the mobile setup procedure. Tap "Next" to proceed.
   
5. Connect your phone to the ii.4GHz WPA-PSK/WPA2-PSK WiFi network that y'all want your device(due south) to connect to
   (network cannot be subconscious). Tap "Side by side" to go on.
   
6. Enter the password of the WiFi that you lot want your device(s) to connect to. Please make certain that your WiFi password is right. Tap "Adjacent" to go along.
   
   Note: The WiFi password is case-sensitive.
7. Steadily hold your phone'south display in forepart of your Zmodo camera until you hear "Device connected". The altitude between your phone and the camera should be about 8 inches.
   
8. Name your device(southward) and gear up a password for it. Tap "Side by side" to proceed.
   
   Note:  The password provides an additional layer of security for your devices. You lot volition not need to use this password when accessing your devices from
   the Zmodo app. Information technology is not required, just it is highly recommended.
9. Your device(s) accept been successfully configured! Tap "Done" to finish. You tin can now share or view your device(south).
   

Mounting Your Cameras

Installation Requirements & Tips:

• If you're installing your cameras outdoors, all wired connections must exist weatherproofed.
  
• Before installing the cameras, carefully program where and how they volition be positioned, and how you will road the wiring that connects your cameras to the ability adapters.
• Endeavour to avert WiFi indicate interference from concrete, cement, and metallic as much every bit possible. Do non place cameras in a location where these materials stand
  between your cameras and your WiFi router.
• Make sure that your cameras are within range of your WiFi network, and that your network meets all of the bandwidth requirements from Section ane.
• If you accept a lot of obstacles between your camera and the WiFi router, the transmission range will be greatly reduced. In order to increase the range, y'all may purchase a WiFi range extender to place near the cameras.

1. Unplug the cameras that accept been configured in Section 1.
2. Line the camera bracket against the wall where you would like to install the cameras, and mark the appropriate holes. Drill 3 holes slightly smaller than the wall anchors and use a hammer to gently insert the anchors into the wall. Fasten the three screws through the holes on the bracket and into the anchors every bit shown.
   Note: Depending on the camera model that you purchased, the photographic camera bracket may or may not be fastened onto the camera when first removed from factory packaging.
   
               (image may vary for your specific camera model)
3. Fasten the bracket to the camera. You volition be able to adjust the photographic camera position using the adjustable camera bracket. Position the camera for an optimal viewing angle, and tighten the bracket.
   
                 (epitome may vary for your specific photographic camera model)
4. Connect the supplied ability adapter to the power port on the camera, and plug the adapter into a nearby power outlet. Repeat steps 1-4 for all cameras in your
   camera kit.
   
            (epitome may vary for your specific camera model)

Recording and Viewing Options

Recording Options
This device is compatible with the cloud service. Please visit www.zmodo.com/support for more information and articles. The cloud service will allow you to:

• Record continuously and shop footage on our secure cloud servers.
• Create and save video clips from your recordings.
• Admission your footage and clips at any time from whatsoever location.
• Bask more than smart features in the future!

Viewing Options

All of your Zmodo devices volition exist bound to your Zmodo user account. Yous can access your camera and other TM devices by using the Zmodo app with whatsoever Android or
iOS device. But download the Zmodo app from TM TM Google Play or the App Store .

You lot can also access your devices from any web browser with our web app. Visit user.zmodo.com and log in withyour Zmodo user account information.

Status Light Definitions

Your camera has an LED light that indicates the status of the photographic camera. Please refer to the guide beneath:

Solid greenish
The camera is powering on.

Blinking green
The camera is ready for setup.

Blinking blue
The camera is connecting to the WiFi network. Please practice
NOT turn off or unplug your photographic camera at this time.

Solid blue
The camera has successfully connected to the WiFi network.

Troubleshooting

If y'all were unable to connect your photographic camera successfully:

• Make certain that y'all are connecting to a 2.4GHz WPAPSK/ WPA2-PSK WiFi network, and your network is not hidden.
• Delight brand certain that you entered the network name and password correctly. Note: Both are case-sensitive.
• During the QR code scan, please make sure that your telephone's display effulgence is high, and avoid glare on your phone'southward brandish.
• Please make sure that your photographic camera is non already leap to another user account.
• Make sure that you have fastened the antenna (if applicable) onto your photographic camera, and endeavour moving your photographic camera closer to the router for the initial setup.
  (Setting up multiple cameras) If you were able to connect some, but non all of your cameras:
• Ability bike the camera(s) that are non connected to the WiFi and echo the setup procedure.

Note: You lot can check the status light of the device to see if it has been successfully continued to the WiFi or not. If the status light is blinking green, it means that information technology has not connected to a WiFi network. If it is solid blue, it means that information technology is already connected to the WiFi network.

Support

Having difficulty?

You lot can use the Live Chat function in the Zmodo app if you have whatsoever technical issues. Delight follow the steps below: Access the "Me" folio in the lower correct corner in
Zmodo app and select "Zmodo Support". For more instructions, troubleshooting, support, and other resources, please visit: www.zmodo.com/support

Like us on Facebook.com/Zmodo

Follow us on Twitter @Zmodo

Android is a trademark of Google Inc. Google Play is a trademark of Google Inc. Apple tree, the Apple Logo, and iPhone are trademarks of Apple tree Inc., registered in the U.S. and other countries. App Store is a service marker of Apple tree Inc.

Read More Well-nigh This Manual & Download PDF:

Documents / Resources

References

Source: https://manuals.plus/zmodo/hd-wifi-indoor-outdoor-camera-kit-manual

Posted by: godinthemot.blogspot.com

Share this post